How to flash MBN File using QPST (QFIL) tool: qualcomm

QualComm CPU Flashing is carried out in two phases:-

1- Driver Installation

2- Software Upgrade

Driver Installation:

1- Download and install Qualcomm driver. While installing driver avoid using cable for successful installation.

2- After installation, connect Phone to PC using USB cable.

3- While connecting to PC, phone should be switched off and press volume up & down as boot key.

4- If it makes Qualcomm port, then driver has been successfully installed.

Qpst Tool v2.7.453.0 (Latest Version): Download

Software Upgrade:

1- Download the QPST tool & driver.

2- Make sure your device has the Power to support flashing.

3- Run QFIL tool.

4- Click on Browse under the Programmer path to select MBN File.

MBN File Format:

5- As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.

6- Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml

Load XML comes with two option:

a- rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.

b- rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.

7- Switch off the device and connect it to PC by pressing Volume up & down key.

8- Click on Select Port and choose the port.

9- Click on Download to start flashing.

10- Unplug USB cable, when Finish Download appears.

Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process.